Formula Overview

$17.00/0.05 oz. - $340.00 Per Ounce

The formula is supposed to be a "highly pigmented powder" that goes on "evenly and blends well." MAC eyeshadows run the gamut from total failures to long-time, cult-favorite staples. In general, the permanent line has been more consistent in performance--and higher performance at that--compared to limited edition launches, but it can really depend.

The Matte finish tends to have a firmer press and a bit of thinness compared to other matte formulas on the market, so MAC matte eyeshadows tend to build up better and have better wear-time without fallout as they're not powdery at all. Some of the newer matte finish shades have had a more velvety quality to them that gives them a softer feel but aren't powdery; these have been easier to blend and are often more pigmented in one layer.

The Lustre finish is designed to have sheerer pigmentation, and it often has more sheer to medium coverage with a drier, dustier consistency that can be hard to apply with a dry brush. Lustre finish shades can suffer from fallout during application, too. They are the old school version of an eyeshadow "topper." I would recommend applying with a fingertip or applying with a dampened brush to get smoother, more even coverage and minimize fallout.

The Satin finish is few and far in-between, but it is softer and more yielding than the Matte finish but performs similarly. They tend to have very low sheen but are quite blendable with medium to opaque coverage. It can be easy to mix the finish up with the Velvet finish, which has more of a sparkle-over-matte effect but are more powdery than the true Matte finish.

The Frost finish is more firmly-pressed into the pan but doesn't have fallout, is often pigmented, and blends out well enough. They can sometimes be a little drier to the touch depending on how much shimmer is in the shade. The Veluxe Pearl finish is one of the creamier takes within the range, and newer shades released in the finish tend to have more moderate, silicone-like slip. I've found that Veluxe Pearl finish shades tend to have more semi-opaque pigmentation and are more consistent in performance than some of the other finishes.

One thing I've found with MAC eyeshadows is that they tend to last longer without primer than the average brand (eight hours). While some eyeshadow shades don't swatch well, they often apply better in practice--as in on the eyes!--than just swatched on the skin. They can be quite hit or miss, and they have inconsistencies between releases (see Carbon and its sordid review history!).

Browse all of our MAC Eyeshadow swatches.

Ingredients

Talc, Dimethiconol Stearate, Dimethicone, Lauroyl Lysine, Diisostearyl Malate, Caprylyl Glycol, Hexylene Glycol, Octyldodecyl Stearoyl Stearate, Phenoxyethanol, [+/- Mica, Titanium Dioxide (Ci 77891), Iron Oxides (Ci 77491), Iron Oxides (Ci 77499), Iron Oxides (Ci 77492), Aluminum Powder (Ci 77000), Bismuth Oxychloride (Ci 77163), Blue 1 Lake (Ci 42090), Bronze Powder (Ci 77400), Carmine (Ci 75470), Chromium Hydroxide Green (Ci 77289), Chromium Oxide Greens (Ci 77288), Copper Powder (Ci 77400), Ferric Ammonium Ferrocyanide (Ci 77510), Ferric Ferrocyanide (Ci 77510), Manganese Violet (Ci 77742), Ultramarines (Ci 77007), Yellow 5 Lake (Ci 19140)] Rds Product Name: Mesmerizing Eye Shadow Division: Mc (Mac)Ingredients: Calcium Aluminum Borosilicate, Octyldodecyl Stearoyl Stearate, Polybutene, Zinc Stearate, Silica, Dimethicone, Tin Oxide, Synthetic Fluorphlogopite, Aluminum Calcium Sodium Silicate, Caprylyl Glycol, Hexylene Glycol, Phenoxyethanol, [+/- Mica, Titanium Dioxide (Ci 77891), Iron Oxides (Ci 77491), Iron Oxides (Ci 77492), Iron Oxides (Ci 77499), Aluminum Powder (Ci 77000), Bismuth Oxychloride (Ci 77163), Blue 1 (Ci 42090), Blue 1 Lake (Ci 42090), Bronze Powder (Ci 77400), Carmine (Ci 75470), Chromium Hydroxide Green (Ci 77289), Chromium Oxide Greens (Ci 77288), Copper Powder (Ci 77400), Ferric Ammonium Ferrocyanide (Ci 77510), Ferric Ferrocyanide (Ci 77510), Manganese Violet (Ci 77742), Ultramarines (Ci 77007), Yellow 5 (Ci 19140), Yellow 5 Lake (Ci 19140)]

Disclaimer: Ingredient lists are as available by the brand (or retailer) at the time of publishing. Please always check product packaging, if it exists, for the ingredient list applicable to the product you're purchasing, or the brand or retailer's website for the most up-to-date ingredient list.

Formula Overview

$17.00/0.05 oz. - $340.00 Per Ounce

The formula is supposed to be a "highly pigmented powder" that goes on "evenly and blends well." MAC eyeshadows run the gamut from total failures to long-time, cult-favorite staples. In general, the permanent line has been more consistent in performance--and higher performance at that--compared to limited edition launches, but it can really depend.

The Matte finish tends to have a firmer press and a bit of thinness compared to other matte formulas on the market, so MAC matte eyeshadows tend to build up better and have better wear-time without fallout as they're not powdery at all. Some of the newer matte finish shades have had a more velvety quality to them that gives them a softer feel but aren't powdery; these have been easier to blend and are often more pigmented in one layer.

The Lustre finish is designed to have sheerer pigmentation, and it often has more sheer to medium coverage with a drier, dustier consistency that can be hard to apply with a dry brush. Lustre finish shades can suffer from fallout during application, too. They are the old school version of an eyeshadow "topper." I would recommend applying with a fingertip or applying with a dampened brush to get smoother, more even coverage and minimize fallout.

The Satin finish is few and far in-between, but it is softer and more yielding than the Matte finish but performs similarly. They tend to have very low sheen but are quite blendable with medium to opaque coverage. It can be easy to mix the finish up with the Velvet finish, which has more of a sparkle-over-matte effect but are more powdery than the true Matte finish.

The Frost finish is more firmly-pressed into the pan but doesn't have fallout, is often pigmented, and blends out well enough. They can sometimes be a little drier to the touch depending on how much shimmer is in the shade. The Veluxe Pearl finish is one of the creamier takes within the range, and newer shades released in the finish tend to have more moderate, silicone-like slip. I've found that Veluxe Pearl finish shades tend to have more semi-opaque pigmentation and are more consistent in performance than some of the other finishes.

One thing I've found with MAC eyeshadows is that they tend to last longer without primer than the average brand (eight hours). While some eyeshadow shades don't swatch well, they often apply better in practice--as in on the eyes!--than just swatched on the skin. They can be quite hit or miss, and they have inconsistencies between releases (see Carbon and its sordid review history!).

Browse all of our MAC Eyeshadow swatches.

Ingredients

Talc, Dimethiconol Stearate, Dimethicone, Lauroyl Lysine, Diisostearyl Malate, Caprylyl Glycol, Hexylene Glycol, Octyldodecyl Stearoyl Stearate, Phenoxyethanol, [+/- Mica, Titanium Dioxide (Ci 77891), Iron Oxides (Ci 77491), Iron Oxides (Ci 77499), Iron Oxides (Ci 77492), Aluminum Powder (Ci 77000), Bismuth Oxychloride (Ci 77163), Blue 1 Lake (Ci 42090), Bronze Powder (Ci 77400), Carmine (Ci 75470), Chromium Hydroxide Green (Ci 77289), Chromium Oxide Greens (Ci 77288), Copper Powder (Ci 77400), Ferric Ammonium Ferrocyanide (Ci 77510), Ferric Ferrocyanide (Ci 77510), Manganese Violet (Ci 77742), Ultramarines (Ci 77007), Yellow 5 Lake (Ci 19140)] Rds Product Name: Mesmerizing Eye Shadow Division: Mc (Mac)Ingredients: Calcium Aluminum Borosilicate, Octyldodecyl Stearoyl Stearate, Polybutene, Zinc Stearate, Silica, Dimethicone, Tin Oxide, Synthetic Fluorphlogopite, Aluminum Calcium Sodium Silicate, Caprylyl Glycol, Hexylene Glycol, Phenoxyethanol, [+/- Mica, Titanium Dioxide (Ci 77891), Iron Oxides (Ci 77491), Iron Oxides (Ci 77492), Iron Oxides (Ci 77499), Aluminum Powder (Ci 77000), Bismuth Oxychloride (Ci 77163), Blue 1 (Ci 42090), Blue 1 Lake (Ci 42090), Bronze Powder (Ci 77400), Carmine (Ci 75470), Chromium Hydroxide Green (Ci 77289), Chromium Oxide Greens (Ci 77288), Copper Powder (Ci 77400), Ferric Ammonium Ferrocyanide (Ci 77510), Ferric Ferrocyanide (Ci 77510), Manganese Violet (Ci 77742), Ultramarines (Ci 77007), Yellow 5 (Ci 19140), Yellow 5 Lake (Ci 19140)]

Disclaimer: Ingredient lists are as available by the brand (or retailer) at the time of publishing. Please always check product packaging, if it exists, for the ingredient list applicable to the product you're purchasing, or the brand or retailer's website for the most up-to-date ingredient list.

Formula Overview

$17.00/0.05 oz. - $340.00 Per Ounce

The formula is supposed to be a "highly pigmented powder" that goes on "evenly and blends well." MAC eyeshadows run the gamut from total failures to long-time, cult-favorite staples. In general, the permanent line has been more consistent in performance--and higher performance at that--compared to limited edition launches, but it can really depend.

The Matte finish tends to have a firmer press and a bit of thinness compared to other matte formulas on the market, so MAC matte eyeshadows tend to build up better and have better wear-time without fallout as they're not powdery at all. Some of the newer matte finish shades have had a more velvety quality to them that gives them a softer feel but aren't powdery; these have been easier to blend and are often more pigmented in one layer.

The Lustre finish is designed to have sheerer pigmentation, and it often has more sheer to medium coverage with a drier, dustier consistency that can be hard to apply with a dry brush. Lustre finish shades can suffer from fallout during application, too. They are the old school version of an eyeshadow "topper." I would recommend applying with a fingertip or applying with a dampened brush to get smoother, more even coverage and minimize fallout.

The Satin finish is few and far in-between, but it is softer and more yielding than the Matte finish but performs similarly. They tend to have very low sheen but are quite blendable with medium to opaque coverage. It can be easy to mix the finish up with the Velvet finish, which has more of a sparkle-over-matte effect but are more powdery than the true Matte finish.

The Frost finish is more firmly-pressed into the pan but doesn't have fallout, is often pigmented, and blends out well enough. They can sometimes be a little drier to the touch depending on how much shimmer is in the shade. The Veluxe Pearl finish is one of the creamier takes within the range, and newer shades released in the finish tend to have more moderate, silicone-like slip. I've found that Veluxe Pearl finish shades tend to have more semi-opaque pigmentation and are more consistent in performance than some of the other finishes.

One thing I've found with MAC eyeshadows is that they tend to last longer without primer than the average brand (eight hours). While some eyeshadow shades don't swatch well, they often apply better in practice--as in on the eyes!--than just swatched on the skin. They can be quite hit or miss, and they have inconsistencies between releases (see Carbon and its sordid review history!).

Browse all of our MAC Eyeshadow swatches.

Ingredients

Talc, Dimethiconol Stearate, Dimethicone, Lauroyl Lysine, Diisostearyl Malate, Caprylyl Glycol, Hexylene Glycol, Octyldodecyl Stearoyl Stearate, Phenoxyethanol, [+/- Mica, Titanium Dioxide (Ci 77891), Iron Oxides (Ci 77491), Iron Oxides (Ci 77499), Iron Oxides (Ci 77492), Aluminum Powder (Ci 77000), Bismuth Oxychloride (Ci 77163), Blue 1 Lake (Ci 42090), Bronze Powder (Ci 77400), Carmine (Ci 75470), Chromium Hydroxide Green (Ci 77289), Chromium Oxide Greens (Ci 77288), Copper Powder (Ci 77400), Ferric Ammonium Ferrocyanide (Ci 77510), Ferric Ferrocyanide (Ci 77510), Manganese Violet (Ci 77742), Ultramarines (Ci 77007), Yellow 5 Lake (Ci 19140)] Rds Product Name: Mesmerizing Eye Shadow Division: Mc (Mac)Ingredients: Calcium Aluminum Borosilicate, Octyldodecyl Stearoyl Stearate, Polybutene, Zinc Stearate, Silica, Dimethicone, Tin Oxide, Synthetic Fluorphlogopite, Aluminum Calcium Sodium Silicate, Caprylyl Glycol, Hexylene Glycol, Phenoxyethanol, [+/- Mica, Titanium Dioxide (Ci 77891), Iron Oxides (Ci 77491), Iron Oxides (Ci 77492), Iron Oxides (Ci 77499), Aluminum Powder (Ci 77000), Bismuth Oxychloride (Ci 77163), Blue 1 (Ci 42090), Blue 1 Lake (Ci 42090), Bronze Powder (Ci 77400), Carmine (Ci 75470), Chromium Hydroxide Green (Ci 77289), Chromium Oxide Greens (Ci 77288), Copper Powder (Ci 77400), Ferric Ammonium Ferrocyanide (Ci 77510), Ferric Ferrocyanide (Ci 77510), Manganese Violet (Ci 77742), Ultramarines (Ci 77007), Yellow 5 (Ci 19140), Yellow 5 Lake (Ci 19140)]

Disclaimer: Ingredient lists are as available by the brand (or retailer) at the time of publishing. Please always check product packaging, if it exists, for the ingredient list applicable to the product you're purchasing, or the brand or retailer's website for the most up-to-date ingredient list.

Formula Overview

$17.00/0.05 oz. - $340.00 Per Ounce

The formula is supposed to be a "highly pigmented powder" that goes on "evenly and blends well." MAC eyeshadows run the gamut from total failures to long-time, cult-favorite staples. In general, the permanent line has been more consistent in performance--and higher performance at that--compared to limited edition launches, but it can really depend.

The Matte finish tends to have a firmer press and a bit of thinness compared to other matte formulas on the market, so MAC matte eyeshadows tend to build up better and have better wear-time without fallout as they're not powdery at all. Some of the newer matte finish shades have had a more velvety quality to them that gives them a softer feel but aren't powdery; these have been easier to blend and are often more pigmented in one layer.

The Lustre finish is designed to have sheerer pigmentation, and it often has more sheer to medium coverage with a drier, dustier consistency that can be hard to apply with a dry brush. Lustre finish shades can suffer from fallout during application, too. They are the old school version of an eyeshadow "topper." I would recommend applying with a fingertip or applying with a dampened brush to get smoother, more even coverage and minimize fallout.

The Satin finish is few and far in-between, but it is softer and more yielding than the Matte finish but performs similarly. They tend to have very low sheen but are quite blendable with medium to opaque coverage. It can be easy to mix the finish up with the Velvet finish, which has more of a sparkle-over-matte effect but are more powdery than the true Matte finish.

The Frost finish is more firmly-pressed into the pan but doesn't have fallout, is often pigmented, and blends out well enough. They can sometimes be a little drier to the touch depending on how much shimmer is in the shade. The Veluxe Pearl finish is one of the creamier takes within the range, and newer shades released in the finish tend to have more moderate, silicone-like slip. I've found that Veluxe Pearl finish shades tend to have more semi-opaque pigmentation and are more consistent in performance than some of the other finishes.

One thing I've found with MAC eyeshadows is that they tend to last longer without primer than the average brand (eight hours). While some eyeshadow shades don't swatch well, they often apply better in practice--as in on the eyes!--than just swatched on the skin. They can be quite hit or miss, and they have inconsistencies between releases (see Carbon and its sordid review history!).

Browse all of our MAC Eyeshadow swatches.

Ingredients

Talc, Dimethiconol Stearate, Dimethicone, Lauroyl Lysine, Diisostearyl Malate, Caprylyl Glycol, Hexylene Glycol, Octyldodecyl Stearoyl Stearate, Phenoxyethanol, [+/- Mica, Titanium Dioxide (Ci 77891), Iron Oxides (Ci 77491), Iron Oxides (Ci 77499), Iron Oxides (Ci 77492), Aluminum Powder (Ci 77000), Bismuth Oxychloride (Ci 77163), Blue 1 Lake (Ci 42090), Bronze Powder (Ci 77400), Carmine (Ci 75470), Chromium Hydroxide Green (Ci 77289), Chromium Oxide Greens (Ci 77288), Copper Powder (Ci 77400), Ferric Ammonium Ferrocyanide (Ci 77510), Ferric Ferrocyanide (Ci 77510), Manganese Violet (Ci 77742), Ultramarines (Ci 77007), Yellow 5 Lake (Ci 19140)] Rds Product Name: Mesmerizing Eye Shadow Division: Mc (Mac)Ingredients: Calcium Aluminum Borosilicate, Octyldodecyl Stearoyl Stearate, Polybutene, Zinc Stearate, Silica, Dimethicone, Tin Oxide, Synthetic Fluorphlogopite, Aluminum Calcium Sodium Silicate, Caprylyl Glycol, Hexylene Glycol, Phenoxyethanol, [+/- Mica, Titanium Dioxide (Ci 77891), Iron Oxides (Ci 77491), Iron Oxides (Ci 77492), Iron Oxides (Ci 77499), Aluminum Powder (Ci 77000), Bismuth Oxychloride (Ci 77163), Blue 1 (Ci 42090), Blue 1 Lake (Ci 42090), Bronze Powder (Ci 77400), Carmine (Ci 75470), Chromium Hydroxide Green (Ci 77289), Chromium Oxide Greens (Ci 77288), Copper Powder (Ci 77400), Ferric Ammonium Ferrocyanide (Ci 77510), Ferric Ferrocyanide (Ci 77510), Manganese Violet (Ci 77742), Ultramarines (Ci 77007), Yellow 5 (Ci 19140), Yellow 5 Lake (Ci 19140)]

Disclaimer: Ingredient lists are as available by the brand (or retailer) at the time of publishing. Please always check product packaging, if it exists, for the ingredient list applicable to the product you're purchasing, or the brand or retailer's website for the most up-to-date ingredient list.

Formula Overview

$17.00/0.05 oz. - $340.00 Per Ounce

The formula is supposed to be a "highly pigmented powder" that goes on "evenly and blends well." MAC eyeshadows run the gamut from total failures to long-time, cult-favorite staples. In general, the permanent line has been more consistent in performance--and higher performance at that--compared to limited edition launches, but it can really depend.

The Matte finish tends to have a firmer press and a bit of thinness compared to other matte formulas on the market, so MAC matte eyeshadows tend to build up better and have better wear-time without fallout as they're not powdery at all. Some of the newer matte finish shades have had a more velvety quality to them that gives them a softer feel but aren't powdery; these have been easier to blend and are often more pigmented in one layer.

The Lustre finish is designed to have sheerer pigmentation, and it often has more sheer to medium coverage with a drier, dustier consistency that can be hard to apply with a dry brush. Lustre finish shades can suffer from fallout during application, too. They are the old school version of an eyeshadow "topper." I would recommend applying with a fingertip or applying with a dampened brush to get smoother, more even coverage and minimize fallout.

The Satin finish is few and far in-between, but it is softer and more yielding than the Matte finish but performs similarly. They tend to have very low sheen but are quite blendable with medium to opaque coverage. It can be easy to mix the finish up with the Velvet finish, which has more of a sparkle-over-matte effect but are more powdery than the true Matte finish.

The Frost finish is more firmly-pressed into the pan but doesn't have fallout, is often pigmented, and blends out well enough. They can sometimes be a little drier to the touch depending on how much shimmer is in the shade. The Veluxe Pearl finish is one of the creamier takes within the range, and newer shades released in the finish tend to have more moderate, silicone-like slip. I've found that Veluxe Pearl finish shades tend to have more semi-opaque pigmentation and are more consistent in performance than some of the other finishes.

One thing I've found with MAC eyeshadows is that they tend to last longer without primer than the average brand (eight hours). While some eyeshadow shades don't swatch well, they often apply better in practice--as in on the eyes!--than just swatched on the skin. They can be quite hit or miss, and they have inconsistencies between releases (see Carbon and its sordid review history!).

Browse all of our MAC Eyeshadow swatches.

Ingredients

Talc, Dimethiconol Stearate, Dimethicone, Lauroyl Lysine, Diisostearyl Malate, Caprylyl Glycol, Hexylene Glycol, Octyldodecyl Stearoyl Stearate, Phenoxyethanol, [+/- Mica, Titanium Dioxide (Ci 77891), Iron Oxides (Ci 77491), Iron Oxides (Ci 77499), Iron Oxides (Ci 77492), Aluminum Powder (Ci 77000), Bismuth Oxychloride (Ci 77163), Blue 1 Lake (Ci 42090), Bronze Powder (Ci 77400), Carmine (Ci 75470), Chromium Hydroxide Green (Ci 77289), Chromium Oxide Greens (Ci 77288), Copper Powder (Ci 77400), Ferric Ammonium Ferrocyanide (Ci 77510), Ferric Ferrocyanide (Ci 77510), Manganese Violet (Ci 77742), Ultramarines (Ci 77007), Yellow 5 Lake (Ci 19140)] Rds Product Name: Mesmerizing Eye Shadow Division: Mc (Mac)Ingredients: Calcium Aluminum Borosilicate, Octyldodecyl Stearoyl Stearate, Polybutene, Zinc Stearate, Silica, Dimethicone, Tin Oxide, Synthetic Fluorphlogopite, Aluminum Calcium Sodium Silicate, Caprylyl Glycol, Hexylene Glycol, Phenoxyethanol, [+/- Mica, Titanium Dioxide (Ci 77891), Iron Oxides (Ci 77491), Iron Oxides (Ci 77492), Iron Oxides (Ci 77499), Aluminum Powder (Ci 77000), Bismuth Oxychloride (Ci 77163), Blue 1 (Ci 42090), Blue 1 Lake (Ci 42090), Bronze Powder (Ci 77400), Carmine (Ci 75470), Chromium Hydroxide Green (Ci 77289), Chromium Oxide Greens (Ci 77288), Copper Powder (Ci 77400), Ferric Ammonium Ferrocyanide (Ci 77510), Ferric Ferrocyanide (Ci 77510), Manganese Violet (Ci 77742), Ultramarines (Ci 77007), Yellow 5 (Ci 19140), Yellow 5 Lake (Ci 19140)]

Disclaimer: Ingredient lists are as available by the brand (or retailer) at the time of publishing. Please always check product packaging, if it exists, for the ingredient list applicable to the product you're purchasing, or the brand or retailer's website for the most up-to-date ingredient list.

Formula Overview

$17.00/0.05 oz. - $340.00 Per Ounce

The formula is supposed to be a "highly pigmented powder" that goes on "evenly and blends well." MAC eyeshadows run the gamut from total failures to long-time, cult-favorite staples. In general, the permanent line has been more consistent in performance--and higher performance at that--compared to limited edition launches, but it can really depend.

The Matte finish tends to have a firmer press and a bit of thinness compared to other matte formulas on the market, so MAC matte eyeshadows tend to build up better and have better wear-time without fallout as they're not powdery at all. Some of the newer matte finish shades have had a more velvety quality to them that gives them a softer feel but aren't powdery; these have been easier to blend and are often more pigmented in one layer.

The Lustre finish is designed to have sheerer pigmentation, and it often has more sheer to medium coverage with a drier, dustier consistency that can be hard to apply with a dry brush. Lustre finish shades can suffer from fallout during application, too. They are the old school version of an eyeshadow "topper." I would recommend applying with a fingertip or applying with a dampened brush to get smoother, more even coverage and minimize fallout.

The Satin finish is few and far in-between, but it is softer and more yielding than the Matte finish but performs similarly. They tend to have very low sheen but are quite blendable with medium to opaque coverage. It can be easy to mix the finish up with the Velvet finish, which has more of a sparkle-over-matte effect but are more powdery than the true Matte finish.

The Frost finish is more firmly-pressed into the pan but doesn't have fallout, is often pigmented, and blends out well enough. They can sometimes be a little drier to the touch depending on how much shimmer is in the shade. The Veluxe Pearl finish is one of the creamier takes within the range, and newer shades released in the finish tend to have more moderate, silicone-like slip. I've found that Veluxe Pearl finish shades tend to have more semi-opaque pigmentation and are more consistent in performance than some of the other finishes.

One thing I've found with MAC eyeshadows is that they tend to last longer without primer than the average brand (eight hours). While some eyeshadow shades don't swatch well, they often apply better in practice--as in on the eyes!--than just swatched on the skin. They can be quite hit or miss, and they have inconsistencies between releases (see Carbon and its sordid review history!).

Browse all of our MAC Eyeshadow swatches.

Ingredients

Talc, Dimethiconol Stearate, Dimethicone, Lauroyl Lysine, Diisostearyl Malate, Caprylyl Glycol, Hexylene Glycol, Octyldodecyl Stearoyl Stearate, Phenoxyethanol, [+/- Mica, Titanium Dioxide (Ci 77891), Iron Oxides (Ci 77491), Iron Oxides (Ci 77499), Iron Oxides (Ci 77492), Aluminum Powder (Ci 77000), Bismuth Oxychloride (Ci 77163), Blue 1 Lake (Ci 42090), Bronze Powder (Ci 77400), Carmine (Ci 75470), Chromium Hydroxide Green (Ci 77289), Chromium Oxide Greens (Ci 77288), Copper Powder (Ci 77400), Ferric Ammonium Ferrocyanide (Ci 77510), Ferric Ferrocyanide (Ci 77510), Manganese Violet (Ci 77742), Ultramarines (Ci 77007), Yellow 5 Lake (Ci 19140)] Rds Product Name: Mesmerizing Eye Shadow Division: Mc (Mac)Ingredients: Calcium Aluminum Borosilicate, Octyldodecyl Stearoyl Stearate, Polybutene, Zinc Stearate, Silica, Dimethicone, Tin Oxide, Synthetic Fluorphlogopite, Aluminum Calcium Sodium Silicate, Caprylyl Glycol, Hexylene Glycol, Phenoxyethanol, [+/- Mica, Titanium Dioxide (Ci 77891), Iron Oxides (Ci 77491), Iron Oxides (Ci 77492), Iron Oxides (Ci 77499), Aluminum Powder (Ci 77000), Bismuth Oxychloride (Ci 77163), Blue 1 (Ci 42090), Blue 1 Lake (Ci 42090), Bronze Powder (Ci 77400), Carmine (Ci 75470), Chromium Hydroxide Green (Ci 77289), Chromium Oxide Greens (Ci 77288), Copper Powder (Ci 77400), Ferric Ammonium Ferrocyanide (Ci 77510), Ferric Ferrocyanide (Ci 77510), Manganese Violet (Ci 77742), Ultramarines (Ci 77007), Yellow 5 (Ci 19140), Yellow 5 Lake (Ci 19140)]

Disclaimer: Ingredient lists are as available by the brand (or retailer) at the time of publishing. Please always check product packaging, if it exists, for the ingredient list applicable to the product you're purchasing, or the brand or retailer's website for the most up-to-date ingredient list.

Formula Overview

$17.00/0.05 oz. - $340.00 Per Ounce

The formula is supposed to be a "highly pigmented powder" that goes on "evenly and blends well." MAC eyeshadows run the gamut from total failures to long-time, cult-favorite staples. In general, the permanent line has been more consistent in performance--and higher performance at that--compared to limited edition launches, but it can really depend.

The Matte finish tends to have a firmer press and a bit of thinness compared to other matte formulas on the market, so MAC matte eyeshadows tend to build up better and have better wear-time without fallout as they're not powdery at all. Some of the newer matte finish shades have had a more velvety quality to them that gives them a softer feel but aren't powdery; these have been easier to blend and are often more pigmented in one layer.

The Lustre finish is designed to have sheerer pigmentation, and it often has more sheer to medium coverage with a drier, dustier consistency that can be hard to apply with a dry brush. Lustre finish shades can suffer from fallout during application, too. They are the old school version of an eyeshadow "topper." I would recommend applying with a fingertip or applying with a dampened brush to get smoother, more even coverage and minimize fallout.

The Satin finish is few and far in-between, but it is softer and more yielding than the Matte finish but performs similarly. They tend to have very low sheen but are quite blendable with medium to opaque coverage. It can be easy to mix the finish up with the Velvet finish, which has more of a sparkle-over-matte effect but are more powdery than the true Matte finish.

The Frost finish is more firmly-pressed into the pan but doesn't have fallout, is often pigmented, and blends out well enough. They can sometimes be a little drier to the touch depending on how much shimmer is in the shade. The Veluxe Pearl finish is one of the creamier takes within the range, and newer shades released in the finish tend to have more moderate, silicone-like slip. I've found that Veluxe Pearl finish shades tend to have more semi-opaque pigmentation and are more consistent in performance than some of the other finishes.

One thing I've found with MAC eyeshadows is that they tend to last longer without primer than the average brand (eight hours). While some eyeshadow shades don't swatch well, they often apply better in practice--as in on the eyes!--than just swatched on the skin. They can be quite hit or miss, and they have inconsistencies between releases (see Carbon and its sordid review history!).

Browse all of our MAC Eyeshadow swatches.

Ingredients

Talc, Dimethiconol Stearate, Dimethicone, Lauroyl Lysine, Diisostearyl Malate, Caprylyl Glycol, Hexylene Glycol, Octyldodecyl Stearoyl Stearate, Phenoxyethanol, [+/- Mica, Titanium Dioxide (Ci 77891), Iron Oxides (Ci 77491), Iron Oxides (Ci 77499), Iron Oxides (Ci 77492), Aluminum Powder (Ci 77000), Bismuth Oxychloride (Ci 77163), Blue 1 Lake (Ci 42090), Bronze Powder (Ci 77400), Carmine (Ci 75470), Chromium Hydroxide Green (Ci 77289), Chromium Oxide Greens (Ci 77288), Copper Powder (Ci 77400), Ferric Ammonium Ferrocyanide (Ci 77510), Ferric Ferrocyanide (Ci 77510), Manganese Violet (Ci 77742), Ultramarines (Ci 77007), Yellow 5 Lake (Ci 19140)] Rds Product Name: Mesmerizing Eye Shadow Division: Mc (Mac)Ingredients: Calcium Aluminum Borosilicate, Octyldodecyl Stearoyl Stearate, Polybutene, Zinc Stearate, Silica, Dimethicone, Tin Oxide, Synthetic Fluorphlogopite, Aluminum Calcium Sodium Silicate, Caprylyl Glycol, Hexylene Glycol, Phenoxyethanol, [+/- Mica, Titanium Dioxide (Ci 77891), Iron Oxides (Ci 77491), Iron Oxides (Ci 77492), Iron Oxides (Ci 77499), Aluminum Powder (Ci 77000), Bismuth Oxychloride (Ci 77163), Blue 1 (Ci 42090), Blue 1 Lake (Ci 42090), Bronze Powder (Ci 77400), Carmine (Ci 75470), Chromium Hydroxide Green (Ci 77289), Chromium Oxide Greens (Ci 77288), Copper Powder (Ci 77400), Ferric Ammonium Ferrocyanide (Ci 77510), Ferric Ferrocyanide (Ci 77510), Manganese Violet (Ci 77742), Ultramarines (Ci 77007), Yellow 5 (Ci 19140), Yellow 5 Lake (Ci 19140)]

Disclaimer: Ingredient lists are as available by the brand (or retailer) at the time of publishing. Please always check product packaging, if it exists, for the ingredient list applicable to the product you're purchasing, or the brand or retailer's website for the most up-to-date ingredient list.

Formula Overview

$17.00/0.05 oz. - $340.00 Per Ounce

The formula is supposed to be a "highly pigmented powder" that goes on "evenly and blends well." MAC eyeshadows run the gamut from total failures to long-time, cult-favorite staples. In general, the permanent line has been more consistent in performance--and higher performance at that--compared to limited edition launches, but it can really depend.

The Matte finish tends to have a firmer press and a bit of thinness compared to other matte formulas on the market, so MAC matte eyeshadows tend to build up better and have better wear-time without fallout as they're not powdery at all. Some of the newer matte finish shades have had a more velvety quality to them that gives them a softer feel but aren't powdery; these have been easier to blend and are often more pigmented in one layer.

The Lustre finish is designed to have sheerer pigmentation, and it often has more sheer to medium coverage with a drier, dustier consistency that can be hard to apply with a dry brush. Lustre finish shades can suffer from fallout during application, too. They are the old school version of an eyeshadow "topper." I would recommend applying with a fingertip or applying with a dampened brush to get smoother, more even coverage and minimize fallout.

The Satin finish is few and far in-between, but it is softer and more yielding than the Matte finish but performs similarly. They tend to have very low sheen but are quite blendable with medium to opaque coverage. It can be easy to mix the finish up with the Velvet finish, which has more of a sparkle-over-matte effect but are more powdery than the true Matte finish.

The Frost finish is more firmly-pressed into the pan but doesn't have fallout, is often pigmented, and blends out well enough. They can sometimes be a little drier to the touch depending on how much shimmer is in the shade. The Veluxe Pearl finish is one of the creamier takes within the range, and newer shades released in the finish tend to have more moderate, silicone-like slip. I've found that Veluxe Pearl finish shades tend to have more semi-opaque pigmentation and are more consistent in performance than some of the other finishes.

One thing I've found with MAC eyeshadows is that they tend to last longer without primer than the average brand (eight hours). While some eyeshadow shades don't swatch well, they often apply better in practice--as in on the eyes!--than just swatched on the skin. They can be quite hit or miss, and they have inconsistencies between releases (see Carbon and its sordid review history!).

Browse all of our MAC Eyeshadow swatches.

Ingredients

Talc, Dimethiconol Stearate, Dimethicone, Lauroyl Lysine, Diisostearyl Malate, Caprylyl Glycol, Hexylene Glycol, Octyldodecyl Stearoyl Stearate, Phenoxyethanol, [+/- Mica, Titanium Dioxide (Ci 77891), Iron Oxides (Ci 77491), Iron Oxides (Ci 77499), Iron Oxides (Ci 77492), Aluminum Powder (Ci 77000), Bismuth Oxychloride (Ci 77163), Blue 1 Lake (Ci 42090), Bronze Powder (Ci 77400), Carmine (Ci 75470), Chromium Hydroxide Green (Ci 77289), Chromium Oxide Greens (Ci 77288), Copper Powder (Ci 77400), Ferric Ammonium Ferrocyanide (Ci 77510), Ferric Ferrocyanide (Ci 77510), Manganese Violet (Ci 77742), Ultramarines (Ci 77007), Yellow 5 Lake (Ci 19140)] Rds Product Name: Mesmerizing Eye Shadow Division: Mc (Mac)Ingredients: Calcium Aluminum Borosilicate, Octyldodecyl Stearoyl Stearate, Polybutene, Zinc Stearate, Silica, Dimethicone, Tin Oxide, Synthetic Fluorphlogopite, Aluminum Calcium Sodium Silicate, Caprylyl Glycol, Hexylene Glycol, Phenoxyethanol, [+/- Mica, Titanium Dioxide (Ci 77891), Iron Oxides (Ci 77491), Iron Oxides (Ci 77492), Iron Oxides (Ci 77499), Aluminum Powder (Ci 77000), Bismuth Oxychloride (Ci 77163), Blue 1 (Ci 42090), Blue 1 Lake (Ci 42090), Bronze Powder (Ci 77400), Carmine (Ci 75470), Chromium Hydroxide Green (Ci 77289), Chromium Oxide Greens (Ci 77288), Copper Powder (Ci 77400), Ferric Ammonium Ferrocyanide (Ci 77510), Ferric Ferrocyanide (Ci 77510), Manganese Violet (Ci 77742), Ultramarines (Ci 77007), Yellow 5 (Ci 19140), Yellow 5 Lake (Ci 19140)]

Disclaimer: Ingredient lists are as available by the brand (or retailer) at the time of publishing. Please always check product packaging, if it exists, for the ingredient list applicable to the product you're purchasing, or the brand or retailer's website for the most up-to-date ingredient list.

Formula Overview

$17.00/0.05 oz. - $340.00 Per Ounce

The formula is supposed to be a "highly pigmented powder" that goes on "evenly and blends well." MAC eyeshadows run the gamut from total failures to long-time, cult-favorite staples. In general, the permanent line has been more consistent in performance--and higher performance at that--compared to limited edition launches, but it can really depend.

The Matte finish tends to have a firmer press and a bit of thinness compared to other matte formulas on the market, so MAC matte eyeshadows tend to build up better and have better wear-time without fallout as they're not powdery at all. Some of the newer matte finish shades have had a more velvety quality to them that gives them a softer feel but aren't powdery; these have been easier to blend and are often more pigmented in one layer.

The Lustre finish is designed to have sheerer pigmentation, and it often has more sheer to medium coverage with a drier, dustier consistency that can be hard to apply with a dry brush. Lustre finish shades can suffer from fallout during application, too. They are the old school version of an eyeshadow "topper." I would recommend applying with a fingertip or applying with a dampened brush to get smoother, more even coverage and minimize fallout.

The Satin finish is few and far in-between, but it is softer and more yielding than the Matte finish but performs similarly. They tend to have very low sheen but are quite blendable with medium to opaque coverage. It can be easy to mix the finish up with the Velvet finish, which has more of a sparkle-over-matte effect but are more powdery than the true Matte finish.

The Frost finish is more firmly-pressed into the pan but doesn't have fallout, is often pigmented, and blends out well enough. They can sometimes be a little drier to the touch depending on how much shimmer is in the shade. The Veluxe Pearl finish is one of the creamier takes within the range, and newer shades released in the finish tend to have more moderate, silicone-like slip. I've found that Veluxe Pearl finish shades tend to have more semi-opaque pigmentation and are more consistent in performance than some of the other finishes.

One thing I've found with MAC eyeshadows is that they tend to last longer without primer than the average brand (eight hours). While some eyeshadow shades don't swatch well, they often apply better in practice--as in on the eyes!--than just swatched on the skin. They can be quite hit or miss, and they have inconsistencies between releases (see Carbon and its sordid review history!).

Browse all of our MAC Eyeshadow swatches.

Ingredients

Talc, Dimethiconol Stearate, Dimethicone, Lauroyl Lysine, Diisostearyl Malate, Caprylyl Glycol, Hexylene Glycol, Octyldodecyl Stearoyl Stearate, Phenoxyethanol, [+/- Mica, Titanium Dioxide (Ci 77891), Iron Oxides (Ci 77491), Iron Oxides (Ci 77499), Iron Oxides (Ci 77492), Aluminum Powder (Ci 77000), Bismuth Oxychloride (Ci 77163), Blue 1 Lake (Ci 42090), Bronze Powder (Ci 77400), Carmine (Ci 75470), Chromium Hydroxide Green (Ci 77289), Chromium Oxide Greens (Ci 77288), Copper Powder (Ci 77400), Ferric Ammonium Ferrocyanide (Ci 77510), Ferric Ferrocyanide (Ci 77510), Manganese Violet (Ci 77742), Ultramarines (Ci 77007), Yellow 5 Lake (Ci 19140)] Rds Product Name: Mesmerizing Eye Shadow Division: Mc (Mac)Ingredients: Calcium Aluminum Borosilicate, Octyldodecyl Stearoyl Stearate, Polybutene, Zinc Stearate, Silica, Dimethicone, Tin Oxide, Synthetic Fluorphlogopite, Aluminum Calcium Sodium Silicate, Caprylyl Glycol, Hexylene Glycol, Phenoxyethanol, [+/- Mica, Titanium Dioxide (Ci 77891), Iron Oxides (Ci 77491), Iron Oxides (Ci 77492), Iron Oxides (Ci 77499), Aluminum Powder (Ci 77000), Bismuth Oxychloride (Ci 77163), Blue 1 (Ci 42090), Blue 1 Lake (Ci 42090), Bronze Powder (Ci 77400), Carmine (Ci 75470), Chromium Hydroxide Green (Ci 77289), Chromium Oxide Greens (Ci 77288), Copper Powder (Ci 77400), Ferric Ammonium Ferrocyanide (Ci 77510), Ferric Ferrocyanide (Ci 77510), Manganese Violet (Ci 77742), Ultramarines (Ci 77007), Yellow 5 (Ci 19140), Yellow 5 Lake (Ci 19140)]

Disclaimer: Ingredient lists are as available by the brand (or retailer) at the time of publishing. Please always check product packaging, if it exists, for the ingredient list applicable to the product you're purchasing, or the brand or retailer's website for the most up-to-date ingredient list.

Formula Overview

$17.00/0.05 oz. - $340.00 Per Ounce

The formula is supposed to be a "highly pigmented powder" that goes on "evenly and blends well." MAC eyeshadows run the gamut from total failures to long-time, cult-favorite staples. In general, the permanent line has been more consistent in performance--and higher performance at that--compared to limited edition launches, but it can really depend.

The Matte finish tends to have a firmer press and a bit of thinness compared to other matte formulas on the market, so MAC matte eyeshadows tend to build up better and have better wear-time without fallout as they're not powdery at all. Some of the newer matte finish shades have had a more velvety quality to them that gives them a softer feel but aren't powdery; these have been easier to blend and are often more pigmented in one layer.

The Lustre finish is designed to have sheerer pigmentation, and it often has more sheer to medium coverage with a drier, dustier consistency that can be hard to apply with a dry brush. Lustre finish shades can suffer from fallout during application, too. They are the old school version of an eyeshadow "topper." I would recommend applying with a fingertip or applying with a dampened brush to get smoother, more even coverage and minimize fallout.

The Satin finish is few and far in-between, but it is softer and more yielding than the Matte finish but performs similarly. They tend to have very low sheen but are quite blendable with medium to opaque coverage. It can be easy to mix the finish up with the Velvet finish, which has more of a sparkle-over-matte effect but are more powdery than the true Matte finish.

The Frost finish is more firmly-pressed into the pan but doesn't have fallout, is often pigmented, and blends out well enough. They can sometimes be a little drier to the touch depending on how much shimmer is in the shade. The Veluxe Pearl finish is one of the creamier takes within the range, and newer shades released in the finish tend to have more moderate, silicone-like slip. I've found that Veluxe Pearl finish shades tend to have more semi-opaque pigmentation and are more consistent in performance than some of the other finishes.

One thing I've found with MAC eyeshadows is that they tend to last longer without primer than the average brand (eight hours). While some eyeshadow shades don't swatch well, they often apply better in practice--as in on the eyes!--than just swatched on the skin. They can be quite hit or miss, and they have inconsistencies between releases (see Carbon and its sordid review history!).

Browse all of our MAC Eyeshadow swatches.

Ingredients

Talc, Dimethiconol Stearate, Dimethicone, Lauroyl Lysine, Diisostearyl Malate, Caprylyl Glycol, Hexylene Glycol, Octyldodecyl Stearoyl Stearate, Phenoxyethanol, [+/- Mica, Titanium Dioxide (Ci 77891), Iron Oxides (Ci 77491), Iron Oxides (Ci 77499), Iron Oxides (Ci 77492), Aluminum Powder (Ci 77000), Bismuth Oxychloride (Ci 77163), Blue 1 Lake (Ci 42090), Bronze Powder (Ci 77400), Carmine (Ci 75470), Chromium Hydroxide Green (Ci 77289), Chromium Oxide Greens (Ci 77288), Copper Powder (Ci 77400), Ferric Ammonium Ferrocyanide (Ci 77510), Ferric Ferrocyanide (Ci 77510), Manganese Violet (Ci 77742), Ultramarines (Ci 77007), Yellow 5 Lake (Ci 19140)] Rds Product Name: Mesmerizing Eye Shadow Division: Mc (Mac)Ingredients: Calcium Aluminum Borosilicate, Octyldodecyl Stearoyl Stearate, Polybutene, Zinc Stearate, Silica, Dimethicone, Tin Oxide, Synthetic Fluorphlogopite, Aluminum Calcium Sodium Silicate, Caprylyl Glycol, Hexylene Glycol, Phenoxyethanol, [+/- Mica, Titanium Dioxide (Ci 77891), Iron Oxides (Ci 77491), Iron Oxides (Ci 77492), Iron Oxides (Ci 77499), Aluminum Powder (Ci 77000), Bismuth Oxychloride (Ci 77163), Blue 1 (Ci 42090), Blue 1 Lake (Ci 42090), Bronze Powder (Ci 77400), Carmine (Ci 75470), Chromium Hydroxide Green (Ci 77289), Chromium Oxide Greens (Ci 77288), Copper Powder (Ci 77400), Ferric Ammonium Ferrocyanide (Ci 77510), Ferric Ferrocyanide (Ci 77510), Manganese Violet (Ci 77742), Ultramarines (Ci 77007), Yellow 5 (Ci 19140), Yellow 5 Lake (Ci 19140)]

Disclaimer: Ingredient lists are as available by the brand (or retailer) at the time of publishing. Please always check product packaging, if it exists, for the ingredient list applicable to the product you're purchasing, or the brand or retailer's website for the most up-to-date ingredient list.